MediaMatrix nTouch 60 Spezifikationen PDF herunterladen (Seite 40)

Chapter 3 - Previous releases

36 Version 1.6.2a.0 May 17, 2011

 416 - XDAB channel limit not working correctly

If you drag an XDAB device over to the page, the Virtual XDAB Properties dialog box is

displayed. If specify a channel count value greater than 448, then display the advanced

settings, override the normal channel limit and specify a new limit, when you close the

Advanced properties dialog box and then the Virtual XDAB Properties dialog box, a warning

message is displayed and the device cannot be created.

 420 - Command Prompt window displayed when loading project under

Windows 7 Beta

If you double-click an npa file to open it, the file is opened in NWare as expected, but a

Command Prompt window is also displayed.

 421 - NWare Kiosk display flickers when switching between tabs

If you add the setting

<hide_root_tab value = "true"/> to the Kiosk personality file to hide

the page tabs in your design, and your project contains a button that switches to a new page,

the display will flicker when the button is clicked.

nControl

 414 - nControl time setting advances one hour of what is specified

When all the NION and nControl units on the network are set to use normal mode for time

synchronization, if you change the time on the nControl unit via the web interface, the time is

advanced by one hour from what is specified.

Release 1.5.1 (July 17, 2009)

Live Update

Sometimes, more up-to-date release notes are available online. Click here

(http://www.peaveyoxford.com/Documentation/1.5.1/Release_1.5.1.htm) to download the

latest version from the Peavey Oxford website, then press F5 to refresh the display.

Features

NWare

 Support for nControl units

You can now add nControl nodes to your design. For more information, see Adding an

nControl node to your design in the NWare User Guide.

The device tree includes a new section called nControl Devices, which contains a number of

new devices specifically for use with nControl nodes. For more information, see nControl

Devices in the NWare Device Reference.

Note: These devices cannot be used with NioNodes.

You can upgrade the firmware on nControl nodes by following the same procedure used for

NioNodes. For more information, see Updating firmware on NioNodes and nControl nodes in

the NWare User Guide.

 Support for ControlMatrix TPU devices

You can now add ControlMatrix TPU 2 and TPU 4 devices to your design. These allow you to

work with ControlMatrix telephone paging units. The new devices are located under

Hardware in the NWare device tree.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

MediaMatrix nTouch 60 Spezifikationen Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme MediaMatrix nTouch 60