MediaMatrix nTouch 180 Handbuch PDF herunterladen (Seite 37)

nTouch 180 Hardware Manual

March 27, 2015 Version 1.7.2.0 33

Using a static IP address

1. Navigate to the Network screen.

2. Under Local Area Connection x (where x is the interface number), in the IP

Configuration Method list, click static.

3. Click Set to confirm the action.

You will be asked to log on.

4. Specify your username and password. The default username is superuser; it has no

password.

Further options will be displayed.

5. In the IP box, type an IP address.

Note: The IP address must be unique on the network to avoid conflicts.

6. In the Netmask box, type the network mask for your network.

7. If your subnet is connected to a router, specify the router's IP address in the Gateway box.

If you have no router, set Gateway to none.

8. If you intend to use a domain name to identify the nTouch 180 unit on the network, e.g.

www.my_nTouch 180.com, specify the IP address of a DNS on the network, which will

resolve the name to an IP address.

9. Click Set to confirm the action.

Specifying a name for the nTouch 180 unit

You can specify a name for the nTouch 180 unit that will identify it in NWare and will also be

shown in the web interface.

 To specify a name for the nTouch 180 unit

1. On the Network screen, in the Host Name box, type a name for the nTouch 180 unit.

The name can only contain letters and numbers, and cannot contain spaces. The maximum

length permitted is 12 characters.

2. Click Set to confirm the action.

You will be asked to log on.

3. Specify your username and password. The default username is superuser; it has no

password.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 57 58

Keine Kommentare

MediaMatrix nTouch 180 Handbuch Seite 37